Fill out the registration form download a PDF Registration Form and mail in your payment.
Contact Casey Freeman for more information – firstname.lastname@example.org / (541) 342-3331 / fax (541) 342-4385 – 701 Conger St., Eugene, OR 97402
•5:00pm to 9:00pm at the Eugene branch
• Presented by Chris Gagle of ORACCA/Chemeketa CC
• Dinner and welding materials will be provided
• Cost: $360 per technician / $170 for re-tests
Testing is scheduled with an approximate two hour presentation on course materials, followed by the multiple choice written test. Immediately following this, the practical brazing lab will be conducted. All brazing certification applicants are required to supply their own equipment following is a list of the equipment required.
The student will be required to supply the torch set, either oxy-acetylene or air-acetylene (i.e. “B”tank), with appropriate sized torch to achieve temperatures of 1000 to 1500 degrees F. (no propane or MAPP torch sets permitted), cleaning materials, such as scotch brite or plumbers tape, measuring tape, tubing cutter, reaming tool and tubing brush for 3/4” size tubing, plus safety equipment, which should include goggles and gloves. ORACCA will supply the tubing, fittings, test fixtures and 15% brazing alloy.
The course study guide for the written portion of the Brazing Certification test will be sent, upon registration. The written test
is comprised of a 40 question, multiple choice test. The answers to the test are contained in the study material, so if you don’t study, you may not pass. Please spend time going over the study material. Do not expect to walk in and pass the test. The odds are against it. We send this information so that you can prepare for the material involved with the actual test.
•Materials required for the Test are: Number 2 pencils, and lab materials, both supplied by ORACCA.
•Each examinee must provide their own Oxy-Acetylene or B-tank Acetylene-air torch set, safety
equipment (gloves, eye protection, etc.), measuring, cutting and reaming tools and cleaning materials
(scotchbrite pad, plumbers tape, cleaning clothes, etc.). No maap gas sets will be allowed.
•The cost for this certification exam is $275.00 per participant, all ORACCA member company
employees may take the course for a discounted fee of $195.00.
To insure a firm reservation for the exam, return this form with your check, or credit card information for the
appropriate amount. Space is limited to 16 participants, per session…so register early. If you miss your assigned
test date, there is a $35.00 rescheduling fee to reassigned you to the future class.