- This event has passed.
Brazing Certification Class In Eugene
January 13 @ 7:00 am - 12:00 pm
7:00am to 12:00pm at the Eugene branch
Presented by Chris Gagle of ORACCA/Chemeketa CC
Lunch and welding materials will be provided
Cost: $360 per technician / $170 for re-tests
NOTE: Technicians will need to bring their own tools, equipment and Valid I.D.
Contact Casey Freeman for more information
firstname.lastname@example.org / (541) 342-3331 / fax (541) 342-4385
701 Conger St., Eugene, OR 97402
Testing is scheduled with an approximate two hour presentation on course materials, followed by the multiple choice written
test. Immediately following this, the practical brazing lab will be conducted. All brazing certification applicants are required
to supply their own equipment following is a list of the equipment required.
The student will be required to supply the torch set, either oxy-acetylene or air-acetylene (i.e. “B”tank), with appropriate
sized torch to achieve temperatures of 1000 to 1500 degrees F. (no propane or MAPP torch sets permitted), cleaning
materials, such as scotch brite or plumbers tape, measuring tape, tubing cutter, reaming tool and tubing brush for 3/4” size
tubing, plus safety equipment, which should include goggles and gloves. ORACCA will supply the tubing, fittings, test fixtures
and 15% brazing alloy.